Also, there may be screws located at the end of the door, try to push them through the use of a long screwdriver to the point that you will potentially lift the door and be able to look what’s underneath. On the other hand, there is a chance that the wheels are merely worn out. In this case, you don’t have to do any complicated sliding glass door repair because you can simply look for the manufacturer and get new wheels. After which, it’s time to take off the whole door completely so you will see just how much the wheels had went off. Take them away and replace with the new ones.

With every sliding glass doors repair, try to consider first if it is worth the whole trouble.  Will it be better if you can simply get a new door? Well, in case the glass is still good and the door tend to be weather-tight then simply fixing it may be the thing that you should really do for you to save cash and the effort of buying.

Start the sliding glass doors installation by making use of utility knife to help cut the paint as well as the caulk in the middle of the door casing and surrounding wall. Doing this helps prevent any damage on the wall, in case you’d wish to remove the casing in the future. After that, employ a hammer to tap a putty knife to the seam and try to pull the casing away in a manner that you will be able to insert a flatbar and eventually work on the molding.

Furthermore, get rid of the casing in the perimeter of the door. You can now unscrew and get rid of the head above the top portion of the door frame that bears the sliding door on its proper place. Its time to remove the sliding door away from the frame, together with the heavy parts that came out.

Shifting to the outside of the door, take the screen away from the frame. Cut the caulk away from the outer as well as inner edge of the external trim. You will see that there are secreted face nails located under the paint of the exterior trim. It would be easy to locate them by using a refrigerator magnet. Through the use of nail puller, pull away the head of the nail. By now, you can use a flatbar to get rid of face nails away from the trim. When all the nails are eradicated, get rid of the exterior trim. Through the utilization of tiger’s paw again, get the nails that fasten the plastic fin into the old door frame. Put the new door and by doing all the steps listed here in reverse direction, your sliding glass door installation is complete!