There are times when you need to work on your own to preserve the look of your house. As owner, it is a must that you take part in the process so you don’t end up paying a lot. Learn from the basic to the complicated tasks, after all, you can never really learn a lot. You should also learn those procedures that you seldom deal with like sliding glass doors installation.

Start the sliding glass doors installation by making use of utility knife to help cut the paint as well as the caulk in the middle of the door casing and surrounding wall. Doing this helps prevent any damage on the wall, in case you’d wish to remove the casing in the future. After that, employ a hammer to tap a putty knife to the seam and try to pull the casing away in a manner that you will be able to insert a flatbar and eventually work on the molding.

Furthermore, get rid of the casing in the perimeter of the door. You can now unscrew and get rid of the head above the top portion of the door frame that bears the sliding door on its proper place. Its time to remove the sliding door away from the frame, together with the heavy parts that came out.

Shifting to the outside of the door, take the screen away from the frame. Cut the caulk away from the outer as well as inner edge of the external trim. You will see that there are secreted face nails located under the paint of the exterior trim. It would be easy to locate them by using a refrigerator magnet. Through the use of nail puller, pull away the head of the nail. By now, you can use a flatbar to get rid of face nails away from the trim. When all the nails are eradicated, get rid of the exterior trim. Through the utilization of tiger’s paw again, get the nails that fasten the plastic fin into the old door frame. Put the new door and by doing all the steps listed here in reverse direction, your sliding glass door installation is complete!